Pin Assignment Of Dc Outputs And Mains Connection - Siemens SIMATIC RF600 Series System Manual

Degree of protection
The wide-range power supply unit for SIMATIC RF systems meets degree of protection
IP67.
● Dust-tight: No ingress of dust
● Protected against harm from temporary submersion in water: Water must not enter in
amounts that can cause damage, if the housing is immersed in water 1 m deep for 30
minutes.
All information applies only when connected and locked. The assignment of degrees of
protection is subject to standardized test methods. If no secondary cables are connected,
close the secondary sockets with a protective cap.
10.1.6

Pin assignment of DC outputs and mains connection

Table 10- 4
Table 10- 5
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
10.1 Wide-range power supply unit for SIMATIC RF systems
Pin assignment of the DC outputs
Assignment
1
2
3
4
Pin assignment of the mains connector
Assignment
1
2
3
Ground (0 V)
+24 VDC
+24 VDC
Ground (0 V)
PE
L (100 ... 240 VAC)
N (100 ... 240 VAC)
Accessories
469