General Application Planning - Siemens SIMATIC RF600 Series System Manual

Hide thumbs Also See for SIMATIC RF600 Series:
Table of Contents

Advertisement

RF600 system planning
4.3 Antenna configurations
Purpose of this chapter
This section will help you to select the suitable antenna or the suitable cable taking into
account all important criteria and to make the relevant settings in the configuration
software/WBM of the SIMATIC RF600 system. Correct and safe integration into the
SIMATIC RF600 system is only possible following adaptation of all required parameters.
4.3.9.3

General application planning

Overview of the total SIMATIC RF600 system and its influencing factors
In the following graphic you can see the design of a SIMATIC RF600 reader with connected
antenna and the influencing factors. The influencing factors affect the radiated power output.
Radiated power = transmit power ± influencing factors
You must be aware of these influencing factors and also consider them if you wish to
integrate components such as antennas or cables into the system. These influencing factors
are described in more detail in sections "Antennas (Page 205)" and "Antenna cables
(Page 53)".
Figure 4-9
When operating the SIMATIC RF600 system, you need to observe additional influencing
factors such as minimum spacing between antennas in the room.
52
Overview diagram: Influencing factors
System Manual, 11/2018, J31069-D0171-U001-A21-7618
SIMATIC RF600

Advertisement

Table of Contents
loading

Table of Contents