Transponder
7.9 SIMATIC RF622T
Mechanical specifications
Material
Silicone-free
Color
Antenna material
Type of antenna
Printing
Permitted ambient conditions
Ambient temperature
Distance from metal
Degree of protection
Resistance to mechanical stress
Shock resistant to EN 60068-2-27
Vibration to EN 60068-2-6
Design, dimensions and weight
Dimensions (L x W x D)
Weight
Type of mounting
In the current chip version of the transponder, the TID can be written to. It is not
1)
recommended that you use the TID as user memory.
The information relates to the maximum read range. You will find more information on
2)
ranges in the section "Minimum distances and maximum ranges (Page 337)".
The values for shock and vibration are maximum values and must not be applied
3)
continuously.
390
In operation, during write/read access
•
In operation, outside write/read access
•
During transportation and storage
•
Transponder
•
Spacer
•
Transponder
•
Spacer
•
6GT2810-4HC80
PA12
Yes
Anthracite
Aluminum
Shortened dipole
Can be printed using heat transfer technique
-25 ... +85 °C
•
-40 ... +85 °C
•
-40 ... +80 °C
•
≥ 12 mm (with spacer)
Not suitable for mounting directly on metal
IP67
Torsion and bending stress is not permitted
100 g
3)
50 g
3)
120 × 30 × 6.5 mm
•
130 × 31.5 × 12 mm
•
14 g
•
8 g
•
2 x M4 screws
≤ 1 Nm
System Manual, 11/2018, J31069-D0171-U001-A21-7618
SIMATIC RF600