Introduction - Siemens SIMATIC RF1000 Configuration Manual

Introduction

Purpose of this document
This documentation describes how you create a configuration for the SIMATIC RF1000 and
RF1100 readers, adapt it and transfer it to the readers. This manual is aimed at users,
commissioning engineers and configuration engineers who work with the SIMATIC RF1000/
RF1100 readers in the areas of configuration, engineering and commissioning and who were
trained on the software components specified in the manual. Using this manual, you can adapt
the standard configuration of the SIMATIC RF1000/RF1100 readers to your needs.
Note
Trained personnel
Note that this manual is aimed exclusively at personnel trained with the software components
specified in the manual.
Note
ISO transponders do not require a configuration
When ISO transponders of the SIMATIC Ident product family (ISO 15693 / MDS D) are used, the
readers do not generally need to be configured and do not need a configuration file created with
the Config editor. These transponders can be operated directly without configuration.
This also applies to some other transponder/card types. If necessary, check whether the
transponders/cards used are detected by the readers in delivery state.
Scope of validity of this documentation
These operating instructions are valid for the SIMATIC RF1040R (6GT2831-6CA60), RF1060R
(6GT2831-6AA60) and RF1070R (6GT2831-6BA60) as of firmware version V2.03.04, as well as
the SIMATIC RF1140R (6GT2831-6CB00) and SIMATIC RF1170R (6GT2831-6BB00), and describe
the delivery state as of 08/2023.
Registered trademarks
The following and possibly other names not identified by the registered trademark sign
registered trademarks of Siemens AG:
SIMATIC ®, SIMATIC RF ®, MOBY ®, RF-MANAGER ® and SIMATIC Sensors ®
Orientation in the documentation
You can find additional information on installing, connecting and commissioning, as well as on
programming and the technical specifications of the readers, in the "SIMATIC RF1000" and
"SIMATIC RF1100" operating instructions.
Link: (https://support.industry.siemens.com/cs/ww/en/ps/24223/man)
SIMATIC RF1000, RF1100
Configuration Manual, 08/2023, C79000-G8976-C647-03
1
are
®
5