Ordering Data; Installation - Siemens SIMATIC RF600 Series System Manual

Antennas
6.3 SIMATIC RF620A
6.3.2

Ordering data

Table 6- 10
Product
SIMATIC RF620A (ETSI)
SIMATIC RF620A (FCC)
Table 6- 11
Product
Connecting cable between
reader and antenna
6.3.3

Installation

Two holes for M5 screws are provided for mounting the antenna. The antenna is suitable for
mounting on metallic and non-metallic surfaces.
Note
Achieving optimum wave propagation
To achieve optimum wave propagation, the antenna should not be surrounded by conducting
objects. The area between antenna and transponder should also allow wave propagation
without interference.
Note
Antenna gain depends on the mounting surface
Note that the antenna gain depends on the material of the mounting surface. If the antenna
is mounted on a metallic surface, the antenna gain is -5 dBi. If the antenna is mounted on a
non-metallic surface, the antenna gain is -10 dBi.
226
Ordering data RF620A
Ordering data accessories
1 m (cable loss 0.5 dB)
3 m (cable loss 1.0 dB)
5 m, suitable for drag chains
(cable loss 1.5 dB)
10 m (cable loss 2.0 dB)
10 m (cable loss 4.0 dB)
15 m, suitable for drag chains
(cable loss 4.0 dB)
20 m (cable loss 4.0 dB)
40 m (cable loss 5.0 dB)
Article number
6GT2812-1EA00
6GT2812-1EA01
Article number
6GT2815-0BH10
6GT2815-0BH30
6GT2815-2BH50
6GT2815-1BN10
6GT2815-0BN10
6GT2815-2BN15
6GT2815-0BN20
6GT2815-0BN40
System Manual, 11/2018, J31069-D0171-U001-A21-7618
SIMATIC RF600