Rf600 System Planning; Overview; Possible System Configurations - Siemens SIMATIC RF600 Series System Manual

RF600 system planning

4.1

Overview

You should observe the following criteria for implementation planning:
● Possible system configurations
● Antenna configurations
● Environmental conditions for transponders
● The response of electromagnetic waves in the UHF band
● Regulations applicable to frequency bands
● EMC Directives
4.2

Possible system configurations

The SIMATIC RF600 system is characterized by a high level of standardization of its
components. This means that the system follows the TIA principle throughout: Totally
Integrated Automation. It provides maximum transparency at all levels with its reduced
number of interfaces. This ensures optimum interaction between all system components.
The RF600 system with its flexible components offers many possibilities for system
configuration. This section shows you how you can use the RF600 components on the basis
of various example scenarios.
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
4
33