Introduction - Siemens SIMATIC Ident CB Gate Operating Instructions Manual

Introduction

Purpose of these operating instructions
These operating instructions contain information required for installing, commissioning and
using the SIMATIC Ident CB Gate. The documentation is aimed at installation engineers,
commissioning engineers, configuring engineers and operators who install, commission,
configure and work with the SIMATIC Ident CB Gate.
Basic knowledge required
These operating instructions assume general knowledge of automation engineering and
identification systems.
Scope of validity of this documentation
These operating instructions are valid for the SIMATIC Ident CB Gate as of product version
"01", and describe the delivery state as of xx/2022.
Trademarks
The following and possibly other names not identified by the registered trademark sign ® are
registered trademarks of Siemens AG:
SIMATIC ®, SIMATIC RF ® and MOBY ®
Orientation in the documentation
You can find detailed information on the components installed in the SIMATIC Ident CB Gate
in the following manuals:
• "SIMATIC S7 S7-1200 Automation System" system manual
• "SIMATIC STEP 7 S7-1200 Motion Control" function manual
• "SITOP PSU6200 1AC" manual
• "SCALANCE XB-000 Industrial Ethernet Switches" operating instructions
• "SIMATIC RF600" system manual
• "SIMATIC RF600" configuration manual
• "SIMATIC HMI Devices Comfort Panels" operating instructions
• "Ident profile and Ident blocks, standard function for Ident systems" function manual
You can find the current versions of the manuals on the pages of the Siemens Industry Online
Support (https://support.industry.siemens.com/cs/ww/en/ps/13613).
SIMATIC Ident CB Gate
Operating Instructions, 08/2022, C79000-G8976-C671-01
1
5