Siemens SIMATIC RF600 Series System Manual page 44

Hide thumbs Also See for SIMATIC RF600 Series:

Table of Contents

RF600 system planning

4.3 Antenna configurations

Antenna configuration 6

Antenna configuration 7

Description/ application areas

Preferred for the identification of goods

at loading gates: Similar to configuration

4, but the reliability of transponder identi-

fication is improved as a result of the four

antennas at separate locations, so the

transponder position is not critical.

Description/ application areas

This tunnel configuration is suitable for

conveyor belt applications. The goods

with the transponders to be read are

moving forwards on a conveyor belt but

the alignment of the transponders rela-

tive to the antennas is not clearly de-

fined. One of the antenna is located on

the floor and radiates vertically upwards

in the direction of the conveyor belt. A

relatively high reading reliability is

achieved due to the use of four anten-

System Manual, 11/2018, J31069-D0171-U001-A21-7618

SIMATIC RF600