7.6
SIMATIC RF610T
7.6.1
Features
The SIMATIC RF610T is passive and maintenance-free. It operates based on the
UHF Class 1 Gen 2 technology and is used for saving the electronic product code (EPC) of
96 bits / 240 bits. The label also has a 512 bit user memory.
The SIMATIC RF610T offers a host of possible uses for a wide range of applications and
supports efficient logistics throughout the entire process chain.
Thanks to its antenna geometry, the transponder can be read from any direction. However,
the range is reduced if it is not aligned in parallel with the antenna.
SIMATIC RF610T
Depending on the environment, the reader/the antennas and the set power
1)
7.6.2
Ordering data
Table 7- 19
Product
SIMATIC RF610T
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
Characteristics
Area of application
Air interface
Memory
Read range
Mounting
Ordering data RF610T
7.6 SIMATIC RF610T
Simple identification, such as barcode re-
•
placement or barcode supplement
Warehouse and distribution logistics
•
Product identification
•
For the Food & Beverage sector, a special ver-
sion can be supplied on request that is certified
for use in contact with food.
According to ISO 18000-63
EPC: 96 ... 240 bits
•
User memory: 64 bytes
•
Max. 5 m
1)
Suspended by means of cable ties, or simi-
•
lar
Can also be fixed with screws or glued by
•
customer.
Not suitable for mounting straight onto met-
•
al.
Article number
6GT2810-2BB80
Transponder
369