Introduction - Siemens SIMATIC RF1100 Operating Instructions Manual

Introduction

Purpose of this documentation
This documentation provides you with an overview of the installation and programming of the
SIMATIC RF1140R and RF1170R readers. The operating instructions are intended for users and
programmers involved in configuration, commissioning and servicing of SIMATIC RF1100
readers.
Basic knowledge required
These operating instructions assume general knowledge of automation engineering and
identification systems.
Scope of validity of this documentation
These operating instructions are valid for the SIMATIC RF1140R and RF1170R readers as of
product version "01" and delivery state as of 08/2023, as well as firmware version V1.0.
Trademarks
The following and possibly other names not identified by the registered trademark sign ® are
registered trademarks of Siemens AG:
SIMATIC ®, SIMATIC RF ® and MOBY ®
Orientation in the documentation
Detailed information on creating and customizing configurations as well as their transfer to the
SIMATIC RF1000 reader is available in the configuration manual "SIMATIC RF1000". You can find
all relevant information for XML configuration and programming in the "XML Programming for
SIMATIC Ident" manual.
You can find the current versions of the various manuals on the pages of the Siemens
Industry Online Support (https://support.industry.siemens.com/cs/ww/en/ps/14970/man).
Recycling and disposal
The products are low in harmful substances, can be recycled and meet the requirements of
the Directive 2012/19/EU for disposal of waste electrical and electronic equipment (WEEE).
Do not dispose of the products at public disposal sites.
For environmentally compliant recycling and disposal of your electronic waste, please
contact a company certified for the disposal of electronic waste or your Siemens
representative.
Adhere to the various country-specific regulations.
SIMATIC RF1100
Operating Instructions, 08/2023, C79000-G8976-C698-02
1
7