Table of Contents
Advertisement
Introduction
1.1
Preface
Purpose of this document
This system manual contains the information needed to plan and configure the system.
It is intended both for programming and testing/debugging personnel who commission the
system themselves and connect it with other units (automation systems, further
programming devices), as well as for service and maintenance personnel who install
expansions or carry out fault/error analyses.
Where this documentation is valid
This documentation is valid for all supplied variations of the SIMATIC RF600 system and
describes the state of delivery as of September 2005.
Conventions
The following terms/abbreviations are used synonymously in this document:
• Reader, read/write device, write/read device
• Tag, transponder, mobile data memory, data carrier, SmartLabel
• Communication module, interface module
History
Edition
09/2005
Declaration of conformity
The EC declaration of conformity and the corresponding documentation are made available
to authorities in accordance with EC directives. Your sales representative can provide these
on request.
RF600
System Manual, 09/2005 Edition, J31069 D0171-U001-A0-7618,
Remarks
First Edition
1
1-1
Advertisement
Table of Contents
