Saving Midi Settings - Yamaha DME32 Owner's Manual

The format for Parameter Change messages is as follows:
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 00000101 05
PARAM TYPE 00000000 00
DATA 0000aaaa dd1
0000bbbb dd2
0000cccc dd3
0000dddd dd4
0000eeee dd5
0000ffff dd6
0000gggg dd7
0000hhhh dd8
EOX 11110111 F7
For reference, Parameter No. values can be printed from DME Manager.

Saving MIDI Settings

1 Choose MIDI from the Tool menu—the main MIDI window appears.
Click File—the MIDI window appears, as shown below.
2
In the Mode section, select Save.
3
In the Save File Name field, enter a title for the MIDI settings.
4
Titles can be up to 24 characters long. Click the Clear button to clear the title if you want to
start again.
5 Click Save.
The MIDI settings are saved and the MIDI window closes. If a file with the same title already
exists, an overwrite confirmation message appears. Click OK to overwrite and continue, or
click Cancel to cancel the operation.
MIDI settings are saved in the "Midi" folder, which is located inside the DME Manager pro-
gram folder. MIDI settings files can be managed (e.g., copied, deleted, backed up, etc.) just
like any other Windows file.

Saving MIDI Settings

System Exclusive Message
Manufacturer's ID No.(YAMAHA)
parameter change or response for request
n=0-15 (Device Channel No.1-16)
group ID (digital mixer)
Device code (DME32)
byte operation for edit buffer
Parameter No. (H high order bit)
Parameter No. (H low order bit)
Parameter No. (L high order bit)
Parameter No. (L low order bit)
Parameter value (H high order bit)
Parameter value (H low order bit)
Parameter value (L high order bit)
Parameter value (L low order bit)
End Of Exclusive
249
DME32—Owner's Manual