Yamaha DME32 Owner's Manual page 177

172
Chapter 9—Component Guide Part II
The OUT meters display the level of each output signal.
Section
Bus level
PHASE
IN
SOLO
ON/OFF
Fader
ON/OFF
OUT
Fader
Note that Matrix Mixer components with only one output (x1) do not feature bus level
controls, so the level of the input channel signal that is fed to the single output channel
is controlled solely by the input channel faders.
For Matrix Mixer components with more than six inputs or outputs, channels are
arranged into pages consisting of six channels. Pages are selected by clicking the tabs
along the top of the control window, as shown on the 16x12 Matrix Mixer below.
DME32—Owner's Manual
Parameter
–Infinity dB to 0.0 dB
NOR/REV
ON/OFF
ON/OFF
–Infinity dB to 6.0 dB Adjusts the level of each input channel
ON/OFF
–Infinity dB to 6.0 dB Adjusts the level of each output channel
For components with more than five outputs (i.e., more than five bus level con-
trols per input channel), the bus level controls in the IN section can be scrolled
up or down by clicking these two arrow buttons.
Range
Adjusts the level of each input channel sig-
nal that is fed to each output channel
Inverts each input channel signal
Solos each input channel
Mutes each input channel
Mutes each output channel
Description