Yamaha DME32 Owner's Manual page 210

Using Full Protect
Full Protect prevents access to all functions. It can be disabled temporarily by entering
the correct password, allowing editing by authorized users. See "Temporarily Disabling
the Protection System" on page 206 for more information.
Use the [UTILITY] button to select the "Setup protection level" function, as
1
shown below.
The UTILITY indicator lights up.
SCENE NO.
0 i
Use the DATA wheel or [INC] and [DEC] buttons to select "Full protect," as
2
shown below.
SCENE NO.
0 i
The PROTECT indicator goes out.
Press the [UTILITY] button repeatedly until the UTILITY indicator goes out.
3
Press the [PROTECT] button.
4
The Shift to Protect Mode display appears, as shown below.
SCENE NO.
0 i
Press the [VALUE] button to enable Full Protect mode, or press the [PARAM-
5
ETER] button to cancel.
Full Protect mode is enabled and the PROTECT indicator lights up.
In Full protect mode, scenes cannot be stored or recalled. Components, parameters,
and values can be selected and viewed in the normal way, but they cannot be edited.
Restricting Access to the DME32
CONFIGURATION
CONFIGURATION
CONFIGURATION
205
SCENE
SCENE
SCENE
DME32—Owner's Manual