Adding Components - Yamaha DME32 Owner's Manual

Adding Components

Components can be added to configurations as follows.
When building a new configuration, add the input and output components first.
Select Edit mode.
1
See "Selecting Edit Mode" on page 45.
Choose a component from the Component menu, as shown below.
2
The component is displayed with a dotted outline, as shown below.
Position the component in the configuration window and then click.
3
The component is added to the configuration, as shown below.
Add the other components necessary to complete the configuration.
4
In addition to using the Component menu, components can be added by dragging
them from the Component List. See "Component List" on page 40.

Adding Components

DME32—Owner's Manual
47