148
Chapter 9—Component Guide Part II
Mod Delay
The Mod Delay component offers a single-channel delay with modulation.
The Mod Delay control window consists of delay controls, input level meter, and stereo
output level meters.
The IN meter displays the input signal level, while the OUT meters display the stereo
output signal levels.
Parameter
DELAY
FB.GAIN
HI.RATIO
FREQ.
DEPTH
HPF
LPF
WAVE
DME32—Owner's Manual
The Mod Delay component features one input and ste-
reo outputs.
Range
0.0–2725.0 ms
–99 to +99%
0.1–1.0
0.05–40.00 Hz
0–100%
THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency (THRU = filter off)
50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency (THRU = filter off)
SINE, TRI
Description
Delay time
Feedback gain
(plus values for normal-phase feedback, minus
values for reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Modulation depth
Modulation waveform