Yamaha DME32 Owner's Manual page 129

The OUT meters display the level of each output signal.
Section Parameter
LEV (bus level)
DLY (delay)
IN
PHASE
SOLO
ON/OFF
Fader
ON/OFF
OUT
Fader
For Delayed Mixer components with more than four inputs (4x), input channels are
arranged into pages consisting of four channels. Likewise, output channels are arranged
into pages consisting of four channels. Pages are selected by clicking the tabs along the
top of the control window, as shown on the 16x12 Delayed Mixer below.
For components with more than four outputs (i.e., more than four bus level
controls per input channel), the bus level controls in the IN section can be
scrolled up or down by clicking these two arrow buttons.
Range
Adjusts the level of each input channel sig-
–Infinity dB to 0.0 dB
nal that is fed to each output channel
Adjusts the delay time of each input chan-
0.0–500.0 ms
nel that is fed to each output channel
NOR/REV Inverts each input channel signal
ON/OFF Solos each input channel
ON/OFF Mutes each input channel
–Infinity dB to 6.0 dB Adjusts the level of each input channel
ON/OFF Mutes each output channel
–Infinity dB to 6.0 dB Adjusts the level of each output channel
123
Delayed Mixer
Description
DME32—Owner's Manual