Yamaha DME32 Owner's Manual page 111

The crossover parameters are explained in the following table.
Section Parameter
FREQ
HPF
SLOPE
FREQ
LOW
2
LPF Gc
SLOPE & TYPE
FREQ
2
HIGH HPF Gc
SLOPE & TYPE
1. THRU (filter off), 6dB/oct, 12dB/oct, 18dB/oct, 24dB/oct (Butterworth).
2. Gc controls appears only when a Gc SLOPE & TYPE filter is selected. For Butterworth, Bessel, and
Linkwitz-Riley, the Gc setting is ignored and the Gc value is fixed as follows: Butterworth and Bessel:
–3 dB, Linkwitz-Riley: –6 dB.
3. SLOPE & TYPE parameter values are as follows:
THRU (filter off)
6dB/oct
12dB/oct Adjustable Gc
12dB/oct Butterworth
12dB/oct Bessel
12dB/oct Linkwitz-Riley
EQ
The EQ page features 3-band parametric EQ for the low and high channels.
The EQ graph above each set of controls displays the EQ settings graphically.
The EQ parameters for both channels explained in the following table.
Section
LOW,
HIGH
Range
20.0 Hz–20.0 kHz Adjusts the low HPF cutoff frequency
1
20.0 Hz–20.0 kHz Adjusts the low LPF cutoff frequency
–6 dB to +6 dB
3
20.0 Hz–20.0 kHz Adjusts the high HPF cutoff frequency
–6 dB to +6 dB
2
18dB/oct Adjustable Gc
18dB/oct Butterworth
18dB/oct Bessel
24dB/oct Adjustable Gc
24dB/oct Butterworth
24dB/oct Bessel
24dB/oct Linkwitz-Riley
Parameter Range
Q 10.0–0.1
F 20.0 Hz–20.0 kHz
G –18 dB to +18 dB
ON/OFF ON/OFF
Crossover Processor
Description
Sets the low HPF filter slope
Adjusts the low LPF gain at the cutoff frequency
Selects the filter low LPF slope and type
Adjusts the high HPF gain at the cutoff frequency
Selects the high HPF filter slope and type
36dB/oct Adjustable Gc
36dB/oct Butterworth
36dB/oct Bessel
48dB/oct Adjustable Gc
48dB/oct Butterworth
48dB/oct Bessel
48dB/oct Linkwitz-Riley
Description
Adjusts the selectivity of each band
Adjusts the frequency of each band
Adjusts the gain of each band
Turns the EQ on and off
105
DME32—Owner's Manual