Connecting The Power Cord; Turning On & Off The Dme32 - Yamaha DME32 Owner's Manual

You can specify which COM port on your PC DME Manager uses, although you'll need to
install DME Manager in order to do this. See "Installing DME Manager" on page 12 for more
information. Using a text editor, open the "setup.ini" file in the DME folder. Change the COM
parameter to match the number of the COM port you want to use. To use COM port 2, for
example, the setting should be "COM2" (without quotation marks).
USB
Important: You need to install the USB driver in order to use the USB port. See page 13.
The front panel USB port is a convenient way to connect a PC to the DME32 and
is ideal for systems where the DME32 rear panel is not easily accessible.
SCENE NO. CONFIGURATION SCENE
88
COMPONENT PARAMETER VALUE
48kHz
44.1kHz
LOCK
EMERGENCY PROTECT UTILITY
CARD
USB port

Connecting the Power Cord

Warning: Turn off all equipment before making any power connections.
Connect the socket-end of the supplied power cord to the AC IN socket on
the rear panel of the DME32. Connect the plug-end to a suitable AC wall out-
let, one that conforms to the power supply requirements stated on the
DME32 rear panel.
Turning On & Off the DME32
To prevent loud clicks and thumps in your speakers, turn on your audio
equipment in the following order (reverse this order when turning off
your equipment)—sound sources, mixer or recorder (e.g., 02R, DME32,
D24, etc.), power amplifiers.
To turn on the DME32, press the [POWER] switch.
1
The following message appears for a few moments.
The number and title of the current configuration and scene appear on the display. The first
parameter of the first component is selected, unless the [USER DEFINE] button has been
assigned, in which case, the parameter assigned to that button is selected and the USER
DEFINE indicator lights up.
When the DME32 is turned on for the first time, or when it's initialized, configuration mem-
ory A contains a simple configuration titled "Mtrx16." This configuration is stored inside the
DME32 and can be overwritten by transferring another configuration from DME Manager.
To turn off the DME32, press the [POWER] switch.
2
DATA SCENE RECALL
7 8 9
INC
4 5 6
POWER
ON OFF
DEC
USER DEFINE 1 2 3
STORE 0 RECALL
DIGITAL MIXING ENGINE
USB cable

Connecting the Power Cord

USB port
DME32—Owner's Manual
11
AC IN
POWER
ON OFF