Linking Component Parameters - Yamaha DME32 Owner's Manual

78
Chapter 7—Other DME Designer Functions

Linking Component Parameters

Component parameters can be linked into groups. When a parameter in a group is
adjusted, the other parameters in that group are also adjusted. Parameter linking allows
simultaneous control of independent signals and can be used, for example, to control
fader groups, stereo signals, or crossover frequencies in multiple speaker systems. In
multiple-unit systems, component parameters can be linked across DME32s. Different
parameter link settings can be stored in each scene.
Choose Parameter Link from the Component menu.
1
The Parameter Link window appears, as shown below.
The Groups section lists all the existing groups, while the Linked Parameters section
lists all the parameters in the selected group, including the unit and component they
belong to.
To create a new group, click Add.
2
Up to 32 groups can be created.
To edit an existing group, select the group from the Groups list, and then click Edit. To
delete an existing group, select the group from the Groups list, and then click Delete.
The Link Group Edit window appears, as shown below.
The number of the selected group appears in the upper-left corner of the window. The
Components section lists all the components in each section of the configuration win-
dow (i.e., the components for each DME32) and the Parameters section lists all the
parameters available for that component.
DME32—Owner's Manual