Saving Configurations; Saving Configurations Under A New Name; Closing Configurations; Saving Configurations - Yamaha DME32 Owner's Manual

60
Chapter 5—Building Configurations
Saving Configurations
The current configuration can be saved to any storage media that can be accessed by the
Windows operating system. If your PC supports PC Cards, configurations can be saved
to a PC Card and then loaded into the DME32 via its card slot.
Note that configurations must be compiled before they can be saved. See "Compiling
Configurations" on page 61 for more information.
Choose Save from the File menu.
1
If the configuration has previously been saved, it's saved and the previous version is
overwritten.
If the configuration has not yet been saved, the standard Windows Save As window
appears, in which case you need to enter a filename, select a folder, and then click Save.
Configurations are saved with a "dme" file extension, and can be managed (e.g., copied,
deleted, backed up, etc.) just like any Windows file.
Saving Configurations under a New Name
The current configuration can be saved under a new name as follows.
Note that configurations must be compiled before they can be saved. See "Compiling
Configurations" on page 61 for more information.
Choose Save As from the File menu.
1
The standard Windows Save As window appears.
Enter the name under which you want to save the configuration.
2
Select the folder where you want to save the configuration.
3
Click Save to save the configuration, or click Cancel to cancel the operation.
4
Closing Configurations
The current configuration can be closed as follows.
Choose Close from the File menu.
1
If the configuration window contains no unsaved changes, the window closes.
If the configuration window contains unsaved changes, a message asking if you would
like to save the changes appears. Click OK to save the changes and close the configura-
tion window, or click Cancel to cancel the operation.
DME32—Owner's Manual
Configurations can also be closed by clicking the Close button in the upper-right
corner of the configuration window.