Yamaha DME32 Owner's Manual page 109

The INPUT and OUTPUT sections of the control window are displayed regardless of
which tab is clicked, and their parameters are explained in the following table.
Section Parameter
LEVEL
INPUT
MUTE
LEVEL
OUTPUT LOW MUTE
PHASE
LEVEL
OUTPUT HIGH
MUTE
PHASE
Delay
The DELAY page features individual delays for the low and high channels. Delay times
can be specified in milliseconds or samples, meters, or feet.
The Delay parameters for both channels are explained in the following table.
Sectio Paramet
n er
ms 0.0–500.0 ms
LOW,
See the following
1
HIGH
m
table
ON/OFF ON/OFF
See the following
DELAY SCALE
table
1. This control's label depends on the Delay Scale setting.
In the DELAY SCALE section, "FS" indicates the selected wordclock frequency, and
"340 m/s" and "1,115.5 ft/s" are the speed of sound in meters and feet respectively (air
temperature = 14˚C, 57.2˚F).
Range
–Infinity dB to 0.0 dB
ON/OFF
–Infinity dB to 0.0 dB
ON/OFF
NOR/REV
–Infinity dB to 0.0 dB
ON/OFF
NOR/REV
Range
Sets the delay time in milliseconds (linked to
control below)
Sets the delay time in the units chosen using
the DELAY SCALE buttons (linked to ms control)
Turns the delay on and off
Selects the delay units for the Sample controls
Crossover Processor
Description
Adjusts the input signal level
Mutes the input
Adjusts the low output signal level
Mutes the low output
Inverts the low output signal
Adjusts the high output signal
level
Mutes the high output
Inverts the high output signal
Description
DME32—Owner's Manual
103