Rear Panel - Yamaha DME32 Owner's Manual

Rear Panel

1 2
WORD CLOCK
OUT
16 15 14
IN +V
16 15 14
AC IN
OUT GND
8 7 6
IN +V
8 7 6
OUT GND
K
A
AC IN connector
This connector is used to connect the DME32 to an AC outlet, using the supplied power
cord. See "Connecting the Power Cord" on page 11 for more information.
B
WORD CLOCK OUT connector
This BNC connector transmits the internally generated wordclock signal or the word-
clock signal received at the WORD CLOCK IN when an external wordclock source is
selected. See "Wordclock Connections" on page 229 for more information.
C
WORD CLOCK 75
This switch is used to terminate the wordclock signal received at the WORD CLOCK
IN. See "Wordclock Connections" on page 229 for more information.
D
WORD CLOCK IN connector
This BNC connector can be used to receive an external wordclock signal. See "Word-
clock Connections" on page 229 for more information.
E
MIDI IN & OUT ports
These are standard MIDI IN and OUT ports and are used to connect the DME32 with
other MIDI equipment for remote operation using MIDI Program Change, Control
Change, and Parameter Change messages. See "MIDI & the DME32" on page 242 for
more information.
F
PC CONTROL RS232C/RS422 switch
This switch is used to select the format for the PC CONTROL port. See "Connecting to
a PC" on page 10 for more information.
G
PC CONTROL port
This 9-pin D-sub connector is used to connect the DME32 to the serial port on a Win-
dows PC. See "Connecting to a PC" on page 10 for more information.
H COM port
This 9-pin D-sub connector is used to connect the DME32 to a Yamaha AD824 AD
Converter. See "AD824 & DA824 Converters" on page 256 for more information.
3 4 5
MIDI
IN OUT IN
75
ON OFF
13 12 11 10 9
4
SLOT
13 12 11 10 9
5 4 3 2 1
2
SLOT
5 4 3 2 1
L
ON/OFF switch
6 7 8
PC CONTROL COM
RS RS
232C 422
M
Rear Panel
9 J
CASCADE OUT CASCADE IN
DME32—Owner's Manual
19
3
SLOT
1
SLOT