Connecting Other Equipment; Connecting An Ipad Or Iphone; Connecting To A Computer; Midi Settings - Yamaha Arius YDP-103 Owner's Manual

Connecting Other Equipment

CAUTION
Before connecting the instrument to other electronic components, turn off the power to all the components. Before turning the
power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components
may result.

Connecting an iPad or iPhone

With an iPad or iPhone connected to your digital
piano, you can use a wide range of apps to expand the
functionality of your instrument in exciting new ways.
For details on how to connect the devices, refer to the
"iPhone/iPad Connection Manual" (page 9), which
you can download for free from the Yamaha web site.

Connecting to a computer

By connecting a computer to the [USB TO HOST]
terminal, you can take advantage of various music
software with your computer and the instrument.
For details on using a computer with this instrument,
refer to the "Computer-related Operations" on the
website.
Instrument
[USB TO HOST]
terminal
NOTE
Use an AB type USB cable. When connecting a USB cable, make
sure that the length is less than 3 meters.
20
YDP-103 Owner's Manual
Computer
USB cable

MIDI Settings

Setting the MIDI Transmit Channels
In any MIDI control setup, the MIDI channels of the
transmitting and receiving devices must be matched
for proper data transfer. You can specify the channel
on which this instrument transmits MIDI data. To do
this, while holding down [GRAND PIANO/FUNC-
TION], press one of the D6 – E6 keys. The D6 key
decreases the value by 1, the E6 key increases the
value by 1, and the D#6 key restores the default value
(channel 1).
Setting range: 1 – 16
Default value: 1
NOTE
• In Dual, the keyboard performance via Voice 1 is transmitted on
the specified MIDI Transmit Channel and the keyboard
performance via Voice 2 is transmitted on the next channel
number in sequence (specified channel + 1).
• No MIDI messages are output during playback of the Demo
Song or Preset Song.
Other MIDI Settings
The MIDI settings other than the Transmit Channel
are set as listed below, and cannot be changed.
• MIDI Receive Channels: ........... All channels (1 – 16)
• Local Control: ............................................................On
• Program Change Transmit/Receive:.......................Yes
• Control Change Transmit/Receive:.........................Yes
D#6 (Default)
D6 (-1) E6 (+1)