Loading Configurations from PC Cards
Configurations stored on PC Cards can be loaded as either configuration A or B.
Insert the PC Card into the DME32 CARD slot.
1
Use the [UTILITY] button to select the "Load from card" function.
2
SCENE NO.
0 i
With the cursor in the COMPONENT section of the display, use the DATA
3
wheel or [INC] and [DEC] buttons to select the configuration to load.
Use the [PARAMETER] button or cursor buttons to select the PARAMETER sec-
4
tion of the display, and then use the DATA wheel or [INC] and [DEC] buttons
to select the DME32 configuration into which you want to load the configu-
ration, as shown in the following example.
SCENE NO.
0 i
Press the [VALUE] button and the following display appears.
5
SCENE NO.
0 i
Press the [VALUE] button to load the selected configuration, or the [PARAM-
6
ETER] button to return to the previous display.
The following display appears while the configuration is being loaded.
SCENE NO.
0 i
When loading is complete, the following display appears.
SCENE NO.
0 i
The selected configuration has been loaded to the DME32.
Press the [UTILITY] button repeatedly until the UTILITY indicator goes out.
7
Loading Configurations from PC Cards
CONFIGURATION
CONFIGURATION
CONFIGURATION
CONFIGURATION
CONFIGURATION
225
SCENE
SCENE
SCENE
SCENE
SCENE
DME32—Owner's Manual