Yamaha DME32 Owner's Manual page 125

Comp 2
The COMP 2 page features compressors for the high-mid and high channels, with gain
reduction (GR) meters, compressor curves, and output level meters.
The gain reduction (GR) meters display the amount of gain reduction being applied by
the Compressors. The compressor curves display the effect of the Compressors. The
output meters display the level of the output signals.
The compressor parameters for all channels are explained in the following table.
Parameter
THRESHOLD –54 dB to 0 dB
RATIO 1:1 to Infinity:1
KNEE HARD, 1, 2, 3, 4, 5
ATTACK 0 ms–120 ms
1
RELEASE
GAIN 0.0 dB to +18.0 dB
ON/OFF ON/OFF
1. 5 ms–42.3 sec (fs = 48 kHz), 6 ms–46.0 sec (fs = 44.1 kHz)
See page 128 for more general information on compressor parameters.
Range
Adjusts the threshold level
Adjusts the compression ratio
Adjusts the Compressor's "hardness"
Adjusts the attack time
Adjusts the release time
Adjusts the output gain
Turns the Compressor on and off
Crossover Processor
Description
DME32—Owner's Manual
119