Selecting A Preset Setting; Making And Saving The Microphone Settings - Yamaha Portable Grand DGX-660 Owner's Manual

Connecting a Microphone and Singing Along with Your Performance

Selecting a Preset Setting

1
Press the [MIC SETTING] button once or
twice to call up the MIC SETTING 1 dis-
play.
2
Select "PRESET" by using the CATE-
GORY [r] or [f] button, then select
the desired one of "STANDARD" ,
"BRIGHTER" and "LOUDER" by rotating
the dial.
The STANDARD setting provides optimum
STANDARD response over the entire frequency spec-
trum ensuring all vocals sound good.
The BRIGHTER setting emphasizes
BRIGHTER higher frequencies making vocals stand
out more in the mix.
The LOUDER setting compresses the
LOUDER overall signal which increases both the
level of your voice and softer sounds.
If you want to make your original settings, set var-
ious parameters (including those on MIC SET-
TING 2) then save the setting as the USER data.
For details, see next section.
70
DGX-660 Owner's Manual
Making and Saving the Micro-
phone Settings
This section explains how to make and save the
detailed settings for the microphone. Only one group
of settings can be saved to USER data.
1
Connect a microphone to the instru-
ment, then press the [MIC SETTING] but-
ton once or twice to call up the MIC
SETTING 1 or 2 display.
MIC SETTING 1 display
MIC SETTING 2 display
2
Use the CATEGORY [r] or [f] button
to select the specific parameter to be
adjusted.
For information on each parameter, see below.
3
Set the value of the specific parameter
by rotating the dial.