Assigning Gpi Inputs - Yamaha DME32 Owner's Manual

You must compile and transfer the configuration to the DME32 for the GPI IN settings
to take effect. See "How to Build & Edit Configurations" on page 44 for more informa-
tion.
The GPI IN parameters are explained in the following table.
Section Parameter
UNIT
GPI Select
GPI CH
Scene Change Scene Select
UNIT
Parameter
COMPONENT
PARAMETER
Configuration Configuration
Change Select
Emergency
Terminal Usage
(for use with Parameters only)
1. Components in the current configuration can be selected.
2. Depends on the component selected.
GPI settings are stored in configurations.
Scene & Configuration Recall
This connection diagram shows how a normally open switch can be
used to recall scenes and configurations. The assigned scene or config-
uration is recalled when the button is pressed (i.e., IN goes high).

Assigning GPI Inputs

Range
1–4 Selects a DME32
1–16 Selects a GPI input
1–99 Assigns a scene to the selected GPI input
Selects the DME32 containing the parameter
1–4
to be assigned
Selects the component whose parameter is
1
to be assigned
2
Selects the parameter to be assigned
Assigns a configuration to the selected GPI
A, B
input
Assigns the selected GPI input for use with
Emergency mode
Normal
Reverse
Low-to-high
High-to-low
215
Description
GPI connection
IN +V
DME32—Owner's Manual