Table of Contents
Advertisement
MIDI Settings
In this section, you can make MIDI-related settings for the instrument. The PSR-A3000 gives you a set of ten pre-
programmed templates that let you instantly and easily reconfigure the instrument to match your particular MIDI
application or external device. Also, you can edit the pre-programmed templates and save up to ten of your original
templates to USER memory.
NOTE You can save all your original templates as a single file to internal memory (USER drive) or a USB flash drive: [FUNCTION] TAB [F] MENU 2 [G] SYSTEM
TAB [E][F] SETUP FILES [G] MIDI SETUP FILES. See page 207.
1
Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [I] MIDI
2
Select a pre-programmed template from the PRESET page (page 195).
If you have already created your original template and saved it to the USER page, you can also select that
template from the USER page.
3
To edit the template, press the [8 ] (EDIT) button to call up the MIDI display.
4
Use the TAB [E][F] buttons to call up the relevant page, then set various parameters to
edit the current MIDI template.
• SYSTEM ....................... MIDI System Settings (page 196)
• TRANSMIT................... MIDI Transmit Settings (page 197)
• RECEIVE...................... MIDI Receive Settings (page 198)
• BASS ............................ Bass Note Settings for Style Playback via MIDI Receive (page 199)
• CHORD DETECT ....... Chord Type Settings for Style Playback via MIDI Receive (page 199)
5
When you've finished editing, press the [EXIT] button to return to the MIDI template
Selection display.
6
Select the USER tab by pressing the TAB [F] button, then press the [6 ] (SAVE) button
to save the edited template.
194
PSR-A3000 Owner's Manual
2
6
3
Advertisement
Table of Contents
