Wordclock Connections; Selecting The Wordclock Source - Yamaha DME32 Owner's Manual

Wordclock Connections

The WORD CLOCK IN and WORD CLOCK OUT
BNC connectors are used to transmit and receive
wordclock signals with other digital audio equip-
ment. When the wordclock source is set to Word-
clock In, the DME32 locks to the wordclock signal
received at the WORD CLOCK IN connector.
The WORD CLOCK OUT connector outputs the
internally generated wordclock signal when the
wordclock source is set to Internal, or the word-
clock signal received at the WORDCLOCK IN
when the wordclock source is set to Wordclock In.
The WORD CLOCK 75 ON/OFF switch is used
to terminate the wordclock signal connected to the
WORD CLOCK IN connector. See "Terminating
BNC Wordclock Distribution" on page 234 for
hookup examples.

Selecting the Wordclock Source

Note: When the wordclock source is changed on the wordclock master device (e.g., AD824
or DME32), noise may occur from the DME32's analog outputs, especially if an MY8-AT
I/O card is installed, so turn down your power amps, or turn off the DME32 beforehand,
otherwise any connected speakers may be damaged.
Choose Word clock from the Tool menu.
1
The Word Clock window appears, as shown below.
The following wordclock sources can be selected.
Source
Word Clock In
Internal
My slot 1 1/2
My slot 1 3/4
My slot 1 5/6
My slot 1 7/8
My slot 2 1/2
My slot 2 3/4
My slot 2 5/6
My slot 2 7/8
My slot 3 1/2
My slot 3 3/4
My slot 3 5/6
Description
External wordclock via the BNC WORD CLOCK IN
Internal 48 kHz wordclock (default setting).
External wordclock via slot 1, input 1/2
External wordclock via slot 1, input 3/4
External wordclock via slot 1, input 5/6
External wordclock via slot 1, input 7/8
External wordclock via slot 2, input 1/2
External wordclock via slot 2, input 3/4
External wordclock via slot 2, input 5/6
External wordclock via slot 2, input 7/8
External wordclock via slot 3, input 1/2
External wordclock via slot 3, input 3/4
External wordclock via slot 3, input 5/6

Wordclock Connections

WORD CLOCK
OUT
75
ON OFF
An external wordclock can
also be sourced from the input
of a digital I/O card.
DME32—Owner's Manual
229
IN