Yamaha DME32 Owner's Manual page 200

If a module with the same title already exists, an overwrite confirmation message
appears. Click OK to overwrite and proceed with the save, or click Cancel to cancel the
operation.
User Modules are saved with a "um" file extension in the Module folder, which is
located inside the DME Manager program folder. User Module files can be managed
(e.g., copied, deleted, backed up, etc.) just like any Windows file.
Loading User Modules
Previously saved User Modules can be loaded as follows.
Select the User Module component to which you want to load the saved User
1
Module.
Choose Module from the Edit menu.
2
Alternatively, choose Module from the Shortcut menu.
The Module window appears.
In the Mode section, select Load.
3
Select the module that you want to load from the File List.
4
The title of the selected module appears in the Select File Name field, as shown below.
Click the Clear button to cancel the selection if you want to select another module.
Click Load.
5
The selected module is loaded and the Module window closes.
195
User Module
DME32—Owner's Manual