Custom Reset–Saving And Recalling Your Original Settings As A Single File - Yamaha TYROS4 Service Manual

Custom Reset–Saving and Recalling Your Original Settings as a Single File
For the items below, you can save your Original Settings as a Single File for future recall.
1
Make all desired settings on the instrument.
2
Call up the operation display.
[FUNCTION] g [I] UTILITY g TAB [t][u] SYSTEM RESET
3
Press one of the [F]–[I] buttons to call up the relevant display for saving your data
[F] SYSTEM SETUP FILES
[G] MIDI SETUP FILES
[H] USER EFFECT FILES
[I] MUSIC FINDER FILES
4
Use the TAB [t][u] buttons to select one of the tabs (other than the PRESET) to which your settings will be
saved.
5
Press the [6q] (SAVE) button to save your fi le.
6
To recall your fi le, press the desired [F]–[I] buttons in the SYSTEM RESET display, then select the desired fi le.
When the fi le is selected, a message is displayed according to the content of the fi le. Press the desired button.
Parameters set on the various displays such as the [FUNCTION] g [I] UTILITY and
microphone setting display are handled as a single System Setup fi le. Refer to the Data List
for details on which parameters belong to the System Setup.
The MIDI settings including the MIDI templates on the USER tab display are handled as a
single fi le.
The User Effect settings including the user effect types, user master EQ types and user
compressor types created via the Mixing Console display, as well as the user vocal
harmony types and user microphone setting memories are managed as a single fi le.
All the preset and created records of the Music Finder are handled as a single fi le.
Tyros4
103