Signal Assignment And Selection - Sony MVS-6000 User Manual

Bank
Auxiliary
bus control
block
a) To turn on the [DME1] to [DME4] buttons requires one of the [KEY1] to [KEY4] and [DSK1]
to [DKS4] buttons to be on.

Signal Assignment and Selection

Assigning signals to buttons
Each cross-point button has a button number, to which you assign a signal.
In addition to the signals input to the PRIMARY INPUTS 1 to 49 connectors
on the rear panel of the switcher, you can also select signals generated within
the switcher.
Each button has assigned to it a video signal and a key signal, forming a pair.
You can set these video and key combinations in a Setup menu.
98
Signal Selection
Bus name Cross-point
button row
AUX1 to AUX48 The key row of
buses the bank selected
with the bank
MONITOR 1 to
selection buttons
MONITOR 8 buses
in the auxiliary
bus control block
Frame memory
source 1 and frame
memory source 2
buses
DME 1 and DME 2
video buses
DME 1 and DME 2
key buses
Edit preview bus
M/E-1 UTILITY bus
P/P UTILITY 1 and P/
P UTILITY 2 buses
M/E-1 Key 1 fill to M/
E-1 Key 4 fill buses
M/E-1 Key 1 source to
M/E-1 Key 4 source
buses
DSK 1 fill to DSK 4 fill
buses
DSK 1 source to DSK
4 source buses
M/E-1 external DME
bus
P/P external DME bus
Delegation operation
Turn on the appropriate
buttons in accordance with
the signal assignment made
in the Setup menu.