Measuring Field Potentials - Boston Scientific Vercise DBS Programming Manual

Measuring Field Potentials

The EGL Scan™ function in DBS mode measures field potentials using an
impedance‑like measurement. These measurements may be taken for data analysis
purposes and stored in the system, but they will not appear on the screen. If you wish to
view this data, contact Boston Scientific.
To measure field potentials with EGL Scan:
1 Click
2 Select EGL Scan from the drop‑down menu. A message will appear to indicate
when measurements are complete.
3 Click to exit.
from the toolbar on any screen.
Using Additional Tools
Vercise™ DBS Programming Manual
91053785-17 63 of 1705