Naming The Areas - Boston Scientific Vercise DBS Programming Manual

Vercise™ DBS Programming Manual

Naming the Areas

You are able to name each Area so that you, and the patient, are reminded of the
anatomical location of each stimulation Area. For example, you may name one Area
"Left" for a stimulation Area located on the left side of the brain and another Area
"Right" for a stimulation Area located on the right side of the brain.
Note: The Area names are displayed on the Clinician Programmer.
To name an Area:
1 Make sure the Area you wish to name is selected.
To select an Area, see the "Selecting an Area" section of this manual.
2 Click on the Area's name.
The default Area names are Area 1, Area 2, Area 3, and Area 4.
3
Edit the text.
Area names may not exceed eight characters in length.
4 Click to save the changes or
Vercise™ DBS Programming Manual
91053785-17 34 of 1705
to exit without saving your changes.