Selecting An Existing Patient - Boston Scientific Vercise DBS Programming Manual

Vercise™ DBS Programming Manual

Selecting an Existing Patient

The Clinician Programmer will automatically recognize a patient if you have previously
link the Clinician Programmer to the patient's hardware.
To select an existing patient:
1 Click the down arrow on the right side of the Patient pull‑down menu.
2
Select an appropriate patient from the alphabetized list.
3
Click the down arrow on the right side of the Reason for Visit pull‑down menu.
4 Select the reason for the patient visit.
The patient session has now begun. You may now proceed to other screens by clicking
the appropriate buttons on the screen.
Vercise™ DBS Programming Manual
91053785-17 12 of 1705