Increasing And Decreasing The Pulse Width - Boston Scientific Vercise DBS Programming Manual

Hide thumbs Also See for Vercise DBS:

Table of Contents

Increasing and Decreasing the Pulse Width

The pulse width of the stimulation describes the length of time a burst of energy is

applied to the desired area. The pulse width is measured in microseconds (µS).

To increase the pulse width, click or click and hold the

label on the Programming Screen.

Note: If you attempt to adjust the pulse width above the charge density limit, then

you will see a caution message.

To decrease the pulse width, click or click and hold the

Programming the Patient

button below the PW

Vercise™ DBS Programming Manual

91053785-17 27 of 1705

Show Quick Links

Table of Contents