Increasing And Decreasing The Rate - Boston Scientific Vercise DBS Programming Manual

Vercise™ DBS Programming Manual

Increasing and Decreasing the Rate

The pulse rate of the stimulation, often called just the rate or the frequency, dictates how
many stimulation pulses are delivered in a second, measured in Hertz (Hz) or pulses per
second (pps).
1
To increase the rate, click or click and hold the
on the Programming Screen.
Note: If you attempt to adjust the rate above the charge density limit, then you will
see a caution message.
2
To decrease the rate, click or click and hold the
Vercise™ DBS Programming Manual
91053785-17 28 of 1705
button below the RATE label
button below the RATE label.