R&S TSMA6 Series User Manual page 83

®
R&S TSMA6
2. Open the Windows explorer.
3. Select the USB device.
4. Open the context menu with a right-mouse click and select "Format".
The formatting of the stick starts.
When the formatting has finished, continue with the following procedure to make the
USB stick bootable.
Make the USB stick bootable
1. Open the command prompt (cmd.exe) and run the DiskPart program with the
diskpart command, see
Figure 7-2: Execution of the DiskPart program
2. Use the List disk command to edit all connected drives (disks).
The list of drives appears.
3. Select from the list the USB stick's drive with the select disk [nr] command.
In
User Manual 4900.8057.02 ─ 06
Figure 7-3 the drive 1 is selected.
Figure 7-2.
Update and Restore
Master Image
83