®
R&S
TSMA6
●
For NESTOR mode only:
–
●
For NESTOR Probe mode only:
–
–
NESTOR Mode
To use the R&S TSMA6 in NESTOR mode, the following steps must be performed.
1. In the web-GUI, set the "Mode of Operation" to "NESTOR" and press "Submit".
2. Select a NESTOR workspace file (see
on page 42).
3. Select a scenario (Monitoring or Cellular Network Analysis).
User Manual 4900.8057.02 ─ 06
NESTOR workspace file imported (see
on page 42
WLAN / LAN connection with the NESTOR host (see
the R&S
TSMA6",
on page 32)
PC with NESTOR master installation to check the measurement on the
R&S TSMA6
Configuring the R&S TSMA6
Measurement Modes
"Import NESTOR workspace file"
Chapter 6.1, "Accessing
"Import NESTOR workspace file"
40