R&S TSMA6 Series User Manual page 14

®
R&S TSMA6
Power ON/OFF
The POWER ON/OFF button turns on and off the device.
Press and hold the button results in a coldstart of the R&S TSMA6.
Restore
Press the RESTORE button ( > 20 sec) to bring the system partition of the embedded
Windows CPU back to factory default or to a user backup (if created).
Loss of user data after RESTORE
Executing restore brings the R&S TSMA6 irreversible back to the condition of delivery
or any other later stored backup version.
All user data since last backup is lost.
DC IN Connector
The DC IN connector is used to supply the R&S TSMA6 with DC power. A wide DC
input range 11 V to 18 V / max. 7 A is supported.
USB-C
The USB-C port (multiport for Thunderbolt, Display and standard USB-C 3.1) can be
used for connecting external storage devices, tablets and test mobile phones.
Total power (USB-C): max. 3 A
Overall USB current (USB-C, USB 3.0 and USB 2.0): max. 3 A
USB 3.0 (4x)
The four USB 3.0 ports can be used for connecting external storage devices, data
sticks and test mobile phones.
Power limit: max. 900 mA / port
Overall USB current (USB-C, USB 3.0 and USB 2.0): max. 3 A
USB 2.0 (2x)
The two USB 2.0 ports can be used for connecting external devices, e.g. keyboard,
mouse or software dongle.
Power limit: max. 500 mA / port
Overall USB current (USB-C, USB 3.0 and USB 2.0): max. 3 A
LAN Port - Remote Control
The LAN port provides a high-speed 1 Gbit Ethernet interface with an RJ 45 connector.
It is used to connect the R&S TSMA6 to a host PC.
User Manual 4900.8057.02 ─ 06
Instrument Tour
Rear Panel View
14