Remote Installation Of The Setup File - R&S TSMA6 Series User Manual

®
R&S TSMA6
9. Finally, when all firmware/software packages are installed, a restart is executed.
10. When the R&S TSMAx firmware comes up again, the mainboard firmware is upda-
ted.
Note: Step
firmware package contains a new mainboard firmware.
The following dialog appears:
The mainboard flash is indicated like following:
●
●
●
11. After the flash of the mainboard firmware, the device switches off hard and reboots.
12. The firmware/software installation has finished, when the LEDs display the follow-
ing state.
Mode LED = green resp. blue (depends on the state of the WLAN access point)
13. Reload the web GUI and verify the displayed firmware/software version in the
"Overview" menu. The installed version needs to be indicated.
The R&S TSMA6 is ready for operation.
7.1.2.2

Remote Installation of the Setup File

1. Copy the setup file.
a) For firmware installation:
b) For software installation:
2. Establish a LAN respectively WLAN connection between the remote PC and the
R&S TSMA6.
User Manual 4900.8057.02 ─ 06
step 10 and step 11
Meas LED = red
Mode LED = off
Fans are switched on
Copy the firmware setup file TSMAx-Setup-<Version>.exe into a tempo-
rary directory on the remote PC.
Copy the corresponding setup file into a temporary directory on the remote PC.
are only performed during firmware update, if the
Update and Restore
Firmware Update
55