Changing Password Of R&S Tsma6 - R&S TSMA6 Series User Manual

®
R&S TSMA6
Figure 6-6: Bluetooth settings
2. Navigate to "Configuration" > "Connectivity" > "Bluetooth" and verify the settings:
●
●
If necessary, change the settings via the buttons on the right.
3. On the remote device, activate Bluetooth and enable visibility.
Note: For devices with Android versions ≥ 5.0, there may be problems with visibil-
ity of the device.
Refer to
on page 116.
4. In the R&S TSMA6 web GUI, click "Refresh Device List".
The status text shows the following: "Refreshing device list in progress".
Wait until "No Error" is shown.
5. Click the arrow next to the "Refresh Device List" button and open the Bluetooth
adapter list box
6. Select the device to be paired and click "Connect".
7. On the remote device, confirm the Bluetooth pairing code.
6.6 Changing Password of R&S TSMA6
To change the default password (default PW: 894129) of R&S TSMA6, proceed as fol-
lows. After changing the password, additional steps has to be performed for "Autolo-
gin".
User Manual 4900.8057.02 ─ 06
STATUS = On
Visibility = Visible
Chapter 8.13, "Bluetooth
Configuring the R&S TSMA6
Changing Password of R&S TSMA6
®
device not detected by R&S TSMA6",
44