Remote Vicom Server Software; Preparation; Vicom Server Local Installation - R&S TSMA6 Series User Manual

®
R&S TSMA6

7.2.1 Remote ViCom Server Software

The Remote ViCom Server (rViCom) is an additional software package for the
R&S TSMA6. The latest version of this package is pre-installed on any shipped
R&S TSMA6.
An upgrade of the Remote ViCom package is "only" recommended when operating the
R&S TSMA6 in "rViCom Server" mode.
The update of the Remote ViCom installation could be neglected for other modes of
operation (NESTOR, ROMES, QualiPoc).
The installed version of the Remote ViCom server on the R&S TSMA6 needs to match
with the applied version of rViCom client API on the remote Android device.
In cases of a client / server mismatch, there are the following possibilities:
●
Downgrade the rViCom server version on the R&S TSMA6 to match with the
applied rViCom client version on the Android device.
●
Upgrade the rViCom client version on the connected tablet / smartphone to comply
with the installed rViCom server version on the R&S TSMA6.
7.2.1.1

Preparation

1. To get the setup file TSMAx-rViCom-Setup-<Version>.exe, contact the R&S
customer support.
2. Choose the way of installation and follow the instructions how to prepare.
7.2.1.2

ViCom Server Local Installation

Follow the general instructions in
on page 53,
1. Open the Windows Explorer and execute the setup file
TSMAx-rViCom-Setup-<Version>.exe.
2. The "R&S Software Distributor" window comes up. Select "Local Installation" and
press "Next".
User Manual 4900.8057.02 ─ 06
Chapter 7.1.2.1, "Local Execution of the Setup
step 1 to step 4.
Update and Restore
Software Installation
File",
66