Configuring The R&S Tsma6; Accessing The R&S Tsma6; Start The R&S Tsma6 Web Gui - R&S TSMA6 Series User Manual

®
R&S TSMA6
6 Configuring the R&S TSMA6
6.1 Accessing the R&S TSMA6
There are different ways to control measurements on the R&S TSMA6.
●
Local operation
To use the R&S TSMA6 as an ordinary PC, an external monitor, mouse and key-
board have to be connected to the R&S TSMA6.
●
Remote access
The remote access to the R&S TSMA6 can be realized via the following options.
–
–
6.1.1 Start the R&S TSMA6 Web GUI
To start the R&S TSMA6 web GUI via a remote PC, three possible ways are available.
WLAN
1. Via a tablet or smartphone, you have to establish a WLAN connection to
R&S TSMA6 WLAN access point.
a) Search for a TSMA6 WLAN network. The WLAN access point on the
b) Connect your tablet or smartphone with the TSMA6 WLAN network. The
The WLAN connection between the tablet or smartphone and the R&S TSMA6
device is established.
2. On the tablet or smartphone, start a web browser and enter the following URL:
http://192.168.137.1/
The configuration web GUI of the R&S TSMA6 is started.
User Manual 4900.8057.02 ─ 06
Using the web GUI of the R&S TSMA6 (see
R&S TSMA6 Web GUI",
Establish a remote desktop connection (via LAN/WLAN) (see
"Establish a Remote Desktop
R&S TSMA6 starts automatically by default during the boot process of the
device.
NOTE: This behavior can be switched off (see
on page 127).
required login information can be found on a label on the bottom side of the
R&S TSMA6.
WLAN-Access point SSID: default TSMA6-xxxxxx (xxxxxx is the serial number
of this specific R&S TSMA6)
Default key: instrument
Note:
The SSID and the key are configurable via the web GUI (see
"WLAN", on page 126).
Chapter 6.1.1, "Start the
on page 32).
Connection", on page 33).
Chapter A.2.2.3, "WLAN
Configuring the R&S TSMA6
Accessing the R&S TSMA6
Chapter 6.1.2,
Chapter A.2.2.2,
AP",
32