Checking Mode Of Operation - R&S TSMA6 Series User Manual
Autonomous mobile network scanner
Hide thumbs
Also See for TSMA6 Series:
- User manual (190 pages) ,
- Getting started (51 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
®
R&S
TSMA6
7.1.4 Checking Mode of Operation
In order to execute the setup on the R&S TSMA6, the mode of operation has to be "PC
Mode".
1. Open the R&S TSMA6 web GUI. Use one of the following options.
●
●
●
2. The mode of operation is displayed in the "Overview" page. If the mode is already
"PC Mode", you can continue with
User Manual 4900.8057.02 ─ 06
Remote from a WLAN connected device
Start the web browser and enter the following URL:
http://192.168.137.1
Remote from a LAN connected device
Enter the URL http://TSMAx-xxxxxx.local into the browser.
TSMAx-xxxxxx = R&S TSMA6 host name
This information can be found on a label at the bottom.
Local
Open the Internet Explorer. The web GUI should be loaded automatically. If
not, enter the URL http://localhost into the browser.
Chapter 7.1.2, "Executing
Update and Restore
Firmware Update
Setup",
on page 53.
63
Advertisement
Table of Contents
