Deploy A Tsma6 Image From A Tsma6 Recovery Stick - R&S TSMA6 Series User Manual
Autonomous mobile network scanner
Hide thumbs
Also See for TSMA6 Series:
- User manual (190 pages) ,
- Getting started (51 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
®
R&S
TSMA6
Figure 7-12: File Transfer Finished - "The operation completed successfully"
As long as the procedure is running neither the PC should be switched off nor the
Recovery Stick removed.
7.5.5 Deploy a TSMA6 image from a TSMA6 Recovery Stick
Deployment of a TSMA6 image requires a TSMA6 Recovery Stick containing the four
master image files (GRUB.wim, SYSTEM.wim, DATA.wim, RECOVERY.wim).
1. Connect the TSMA6 Recovery Stick to an USB 3.0 port of the new R&S TSMA6
device.
2. Reboot the R&S TSMA6. The R&S TSMA6 boots from the Recovery Stick and the
start page of the Recovery Stick is displayed.
During the reboot, information about the target device and the image will be
checked. If all requirements are fulfilled, click "Start Recovery" to start the recovery
procedure, otherwise an error message will be displayed.
User Manual 4900.8057.02 ─ 06
Update and Restore
Master Image
91
Advertisement
Table of Contents
