Step 1: Inspecting And Cleaning; Initial Inspection; Periodic Cleaning - Xantrex Watt Series Programmable DC Power Supply XG 850 Operating Manual

Step 1: Inspecting and Cleaning

Initial Inspection

When you first receive your unit, perform a physical check:
1. Inspect the unit for any scratches and cracks, broken switches,
2. Ensure that the packing box contains the 7.5 foot (2.5 m) power cord.
3. If you see external damage or suspect internal damage, contact

Periodic Cleaning

The power supply only requires periodic cleaning, not routine servicing.
Whenever a unit is removed from operation, clean the metal surfaces with
naptha or an equivalent solvent, and clean the front panel with a weak
solution of soap and water. Use low-pressure compressed air to blow dust
from components on the printed circuit boards.
M370078-01
connectors or displays.
Xantrex Customer Service (see Contact Information on page iii) for
an assessment. If the unit is damaged, save all packing materials and
notify Xantrex Customer Service immediately. See packing
instructions in "Return Procedure" on page WA–4.
Step 1: Inspecting and Cleaning
2
2-3