Resistive-Controlled Current Apg Setup - Xantrex Watt Series Programmable DC Power Supply XG 850 Operating Manual

Resistive-Controlled Current APG Setup

To activate APG current mode using an external resistor source:
1. Turn the 9-position mode control to the CAP position to press the
2. Turn rotary Adjust/Enter control to select Rn1S (voltage source from
3. Press the rotary Adjust/Enter control to commit the selected mode.
4. Once the desired level has been selected, press the rotary Adjust/Enter
Deactivating APG Current Mode
To deactivate the APG current mode:
1. Turn the 9-position mode control to the CAP position or press the
2. CAPr is displayed on the output voltage display.
3. Turn the rotary Adjust/Enter control to select nonE.
4. Press the rotary Adjust/Enter control to commit the change.
M370078-01
rotary Adjust/Enter control if the control knob is already at CAP
position.
CAPr is displayed on the output voltage display.
non-isolated connector).
LE C is displayed on the output voltage display.
control to commit the change.
The display will return to the normal display.
rotary Adjust/Enter control if the mode control is already at the CAP
position.
The display will return to the normal display.
Analog Programming Mode
4-17
4