Inspection, Cleaning, And Packaging; Initial Inspection; Maintenance - Xantrex XPR 10-600 Operating Manual

Installation

Inspection, Cleaning, and Packaging

Inspection, Cleaning, and Packaging
Initial When you receive your power supply, do a quick visual check.
Inspection
1. Ensure that the box contains the power supply, the operating manual, the AC
2. Inspect the unit for scratches and cracks as well as broken switches, connectors,
If the unit is damaged, save all packaging materials and notify the carrier
immediately.
Maintenance Routine servicing of the power supply is not required except for periodic cleaning.
Whenever a unit is removed from operation, clean the metal surfaces with naphtha
or an equivalent mild solvent, and clean the front panel with a damp cloth using a
weak solution of soap and water. Use low-pressure compressed air to blow dust from
in and around vent openings and components on the printed circuit boards.
26
input cover and strain relief, and the output cover.
or displays.
Operating Manual for XPR Series Power Supply